Itron
Itron SS2S1D 12S 3W CL200 60H 120-480V
Itron SS2S1D 12S 3W CL200 60H 120-480V
Regular price
$0.00
Regular price
Sale price
$0.00
Unit price
per
Couldn't load pickup availability
The SENTINEL meter is a solid-state, electronic, multimeasurement, polyphase
meter of exceptional accuracy. This self-contained or transformer-rated meter is designed for use in commercial and industrial locations, including large industrial sites and substations. An advanced analog-to-digital sampling technique samples each incoming current and voltage waveform 32 times per cycle (60Hz). Voltage and current values are calculated every two cycles using true Root Mean Square (RMS) calculation. Volt-amperes are calculated by multiplying the RMS voltage value with the RMS current value, thus providing an arithmetic calculation for VA. The SENTINEL meter
also allows for a vectorial calculation of VA.
Key features
The SENTINEL meter keeps your cost down and your options open for a better bottom line.
» Class 0.2 accuracy
» 5 measurement levels
» Voltage Quality:
• Voltage Imbalance
• Phase-to-Phase or Phase-to-Ground VQ event detection • Sags
• Swells
• Current Imbalance
• 255 VQ events
• 3 levels of severity
» Harmonic Detection and Triggering for Voltage and Current
» Wide variety of singlephase and polyphase meter forms
• 20A, 200A, and 320A options
» Totalized registers
» Bidirectional measurement
» MeterKeyTM options:
• Measurement level
• Up to 7 independent TOU rates • Totalization
• Up to 8 channels of Load Profile • Power quality
• Bidirectional measurement
• Per phase voltage
• Per phase current
» Maximum, present, projected, previous, cumulative, continuous cumulative, and coincident demands
» Error and event logging
» Real-Time SiteScanTM onsite monitoring system
» SiteScan diagnostic snapshots for troubleshooting
» Flexible configuration for various metering applications
» Pulse outputs and inputs
» PF (avg., min., inst.)
» ERT Communications
• R300S (energy only)
• R300SD (energy and demand)
• R300SD3 (3 quantities) option board
» RS-232/RS-485 option board, serial communication
» Internal modem option board, phone line communication
» Ethernet board; network communication requires meter
» OEM development options for many communication technologies
also allows for a vectorial calculation of VA.
Key features
The SENTINEL meter keeps your cost down and your options open for a better bottom line.
» Class 0.2 accuracy
» 5 measurement levels
» Voltage Quality:
• Voltage Imbalance
• Phase-to-Phase or Phase-to-Ground VQ event detection • Sags
• Swells
• Current Imbalance
• 255 VQ events
• 3 levels of severity
» Harmonic Detection and Triggering for Voltage and Current
» Wide variety of singlephase and polyphase meter forms
• 20A, 200A, and 320A options
» Totalized registers
» Bidirectional measurement
» MeterKeyTM options:
• Measurement level
• Up to 7 independent TOU rates • Totalization
• Up to 8 channels of Load Profile • Power quality
• Bidirectional measurement
• Per phase voltage
• Per phase current
» Maximum, present, projected, previous, cumulative, continuous cumulative, and coincident demands
» Error and event logging
» Real-Time SiteScanTM onsite monitoring system
» SiteScan diagnostic snapshots for troubleshooting
» Flexible configuration for various metering applications
» Pulse outputs and inputs
» PF (avg., min., inst.)
» ERT Communications
• R300S (energy only)
• R300SD (energy and demand)
• R300SD3 (3 quantities) option board
» RS-232/RS-485 option board, serial communication
» Internal modem option board, phone line communication
» Ethernet board; network communication requires meter
» OEM development options for many communication technologies
